The Ultimate Classic Minnesota Lake Boat
Rare Classic For Sale $39,900
This is a fantastic boat for entertaining friends and family. She is a head turner where ever you go. In 1961, Chris Craft built a few large open boats on large cruiser hulls. This boat has a small V-berth forward which will sleep two or offer loads of storage and a private area for changing. It also contains a new pressurized head. Aft of the v-berth, the rest of the boat is devoted to a cavernous open deck. 8-10 people can be seated in this area! The engines are below deck and out of the way.
The boat is powered by a pair of Corvette block GM 283 engines modified by Chris Craft. The ignition has been converted to electronic, eliminating the less reliable points. Each engine delivers 170hp, starts easily and runs well.
2007-2008 Restoration
Over the last six months, the boat has undergone a total restoration. The boat was disassembled down to the hull. Wood was repaired or replaced as needed, including several stringers and a hull section. Every wood surface on the boat was stripped and professionally resurfaced. Hull sides, bottom, decks, floors, and all varnished surfaces. The vinyl on the decks and floors was replaced. No expense was spared to prepare this boat for years of carefree use. The varnish is 10 coats of deep luster.
This is a fantastic boat for entertaining friends and family. She is a head turner where ever you go. In 1961, Chris Craft built a few large open boats on large cruiser hulls. This boat has a small V-berth forward which will sleep two or offer loads of storage and a private area for changing. It also contains a new pressurized head. Aft of the v-berth, the rest of the boat is devoted to a cavernous open deck. 8-10 people can be seated in this area! The engines are below deck and out of the way.
The boat is powered by a pair of Corvette block GM 283 engines modified by Chris Craft. The ignition has been converted to electronic, eliminating the less reliable points. Each engine delivers 170hp, starts easily and runs well.
2007-2008 Restoration
Over the last six months, the boat has undergone a total restoration. The boat was disassembled down to the hull. Wood was repaired or replaced as needed, including several stringers and a hull section. Every wood surface on the boat was stripped and professionally resurfaced. Hull sides, bottom, decks, floors, and all varnished surfaces. The vinyl on the decks and floors was replaced. No expense was spared to prepare this boat for years of carefree use. The varnish is 10 coats of deep luster.
Saturday, May 10, 2008
More
Not pictured is the teak swim platform. It was sanded to bare wood and coated with three coats of Sikkens teak finish. The deck and floors are covered with Nautalex. The side and aft decks were totally replaced as was much of their supporting structure. They are now prepared and sealed to prevent future moisture damage. Not pictured are the combing boards. The combing boards run from the windows aft to the transom. They are massive pieces of mahogany, two of which are about 11' long. They frame the aft decks. The old ones had rot and we decided to replace rather than patch them. They are refinished now and about to be reinstalled and just look fantastic. Nothing is prettier to me than freshly stained and varnished mahogany. Just finding mahogany of this size wasn't easy.
Subscribe to:
Post Comments (Atom)

No comments:
Post a Comment